Free 3D Printing Models:
Helical Gear Toy 3D Model:
Print two (2) each of the gear and fender washer and one (1) Holder and one (1) press in shaft. This toy is best if the gears are a different color. The screws are M3x8mm WN5451 screws for plastics but a similarly sized wood or sheet metal screw might work.
| HelicalGearToy_Holder90Deg.step |
| HelicalGearToy_PressInShaft.step |
| HelicalGearToy_FenderWasher.step |
| HelicalGearToy_Gear.step |
Hydraulic Bottle Jack Knob 3D model:
|
|
|
| HydraulicKnob.stl |
Fancy slip-on foot 3D model for wooden 2x4 end:
|
|
| TwoByFourFoot.stl |
4-9DB Bin Box Divider 3D model for Argrov Box (or similar) Bins:
|
|
|
| 4-9DB_BinBox.stl |
Parametric FreeCAD 1.0 file for making bin box dividers like above but of any size (like Argrov 4-DB):
| BinBoxesParametric.FCStd |
Replacement Feet for the HP9810A Calculator 3D Model (Resin Printed):
|
|
| left_foot_03.stl |
| right_foot_03.stl |
Tool caddy 3D model for Ruthex type heat set insert soldering iron tips
using (7) M4x10mm screws, washers, and nuts
Optional: High temperature silicone caps for changing tips while they're still hot.
using (7) M4x10mm screws, washers, and nuts
Optional: High temperature silicone caps for changing tips while they're still hot.
| heat_set_tool_holder.stl |
Master Link Storage/Box Handlebar Plug for Mountain Bikes for 18.75mm ID Bars
Store a spare chain master link for the next time your chain breaks on the trail.
This print is an interference fit. If the fit isn't right for your bars, edit the FreeCAD file until you have a snug fit.
Store a spare chain master link for the next time your chain breaks on the trail.
This print is an interference fit. If the fit isn't right for your bars, edit the FreeCAD file until you have a snug fit.
| chainlinkstorage02-body.stl |
| chainlinkstorage02.fcstd |
